Fiber Cement Fixing Manufacturers

Fiber Cement Fixing Systems from a Dedicated Facade Hardware Factory

As a Fiber Cement Fixing Manufacturers, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.

Jiangsu Aozheng Metal Products Co., Ltd. designs and produces the complete range of aluminum and stainless steel fixing components used to mount fiber cement panels, HPL panels, and rock panels on ventilated facades. As a Fiber Cement Fixing manufacturer and supplier, we combine in-house extrusion, stamping, CNC machining, and laser processing under one 32,000 m² factory, giving project teams a single source for clips, tracks, anchors, and brackets that share consistent geometry and corrosion performance.

Our fixing range is engineered for the specific demands of cement board cladding: high pull-out resistance in thin panels, tolerance for thermal movement, and compatibility with concealed or exposed joint patterns. We supply standard AOZ-v-100 series components as well as custom profiles developed from your facade drawings.

Product Range and Application Fit

We manufacture the following fixing families for fiber cement and similar high-pressure laminate panels. Each product type addresses a different installation logic, from simple surface mounting to fully adjustable sub-construction.

Engineering Value and Customization

Every fiber cement facade has a defined wind load, panel weight, and allowable movement. Our engineering team uses those inputs to select the correct clip spacing, bracket gauge, and anchor type. We provide shop drawings and load-compatible recommendations before production, so the fixing system matches the sub-structure and the panel specification.

Custom work is a core part of our factory capability. We develop profiles and brackets from your drawings or samples, including non-standard lengths, slotted holes for adjustability, and mixed material combinations. Our in-house tooling team builds the required extrusion dies and stamping molds, which shortens lead time and keeps prototyping cost predictable.

Materials and Surface Protection

Fiber cement panels are alkaline and can be exposed to moisture, so we select materials and finishes that resist corrosion in ventilated facade conditions. Aluminum components are produced from 6063-T5 or 6061-T6 alloy, with anodizing or powder coating available for color matching and additional durability. Stainless steel parts are offered in 304 or 316 grades, depending on coastal or industrial environment requirements. Carbon steel with hot-dip galvanizing is used for concealed structural brackets where strength is the priority.

Quality Assurance and Testing

We operate our own laboratory with spectrometers, tensile testers, and surface inspection equipment. Every production batch is checked for chemical composition, mechanical properties, and dimensional accuracy. Finished components undergo a 99.99% inspection rate before packing, and we can provide material certificates and test reports with each shipment. Our quality system follows ISO 9001 procedures, and we have factory audits from BV, SGS, and TUV.

Installation and Maintenance Considerations

Proper installation is as important as the component itself. Our fixing systems are designed for straightforward on-site assembly: clips engage the panel edge without drilling, starter tracks provide a level reference, and rivet anchors allow quick fastening to steel or aluminum sub-frames. We supply installation drawings and technical guidance with each order. Maintenance is minimal—periodic inspection of seals and visible fasteners is sufficient, and replacement parts are available from our factory.

Information We Use to Configure Your Solution

To prepare a precise quotation and engineering proposal, we ask for the following project data:

• Panel type, thickness, and dimensions (fiber cement, HPL, rock panel)
• Sub-structure material (steel, aluminum, or concrete) and spacing
• Building height, location, and wind load requirements
• Joint width and desired visual appearance (concealed or exposed)
• Required corrosion protection level (indoor, coastal, industrial)
• Any custom profiles or bracket geometry from your drawings

FAQs

Can you supply custom clips for non-standard fiber cement panel thicknesses?

Yes. We regularly produce H-shield clips and starter tracks for panels from 6 mm to 20 mm. Send us your panel thickness and edge profile, and we will adjust the clip geometry accordingly.

What is the typical lead time for a custom fiber cement fixing order?

For standard components, production usually takes 2–3 weeks after order confirmation. Custom profiles require die development, which adds 2–4 weeks depending on complexity. We provide a confirmed schedule with each quotation.

Do you provide installation drawings or technical support?

Yes. We supply assembly drawings and fixing layout recommendations with every order. Our engineers are available for pre-sale consultation and can review your facade details to ensure compatibility.

Which materials are best for coastal environments?

For coastal or highly corrosive atmospheres, we recommend stainless steel 316 clips and anchors. Aluminum components with heavy anodizing or PVDF coating also perform well when isolated from dissimilar metals.

Can you match the color of the fixing system to the panel or frame?

We offer powder coating in a wide range of RAL colors. If visible parts need to blend with the facade, we can apply a matching finish to clips and tracks.