Stainless Steel Cladding Bracket Manufacturers

Jiangsu Aozheng Metal Products Co., Ltd. is a China-based manufacturer and supplier of stainless steel cladding brackets, engineered for exterior wall cladding systems on concrete, blockwork, masonry, and steel structures. With a 32,000 m² production plant and an annual capacity of 8,000 tons, we produce a full range of brackets—from standard Z and L profiles to complex custom geometries—using automated stamping, CNC machining, and laser processing. Our brackets are designed to provide secure, adjustable, and corrosion-resistant support for natural stone, ceramic, terracotta, and other facade panels.

We serve global construction firms and engineering teams, exporting to the US, Germany, Italy, UK, Japan, Australia, and the Middle East. Our engineering team works directly with your project drawings to deliver brackets that meet load, tolerance, and installation requirements.

Our Stainless Steel Bracket Range

We manufacture a complete line of cladding brackets, each suited to specific facade systems and structural conditions. The table below summarizes our standard range and typical applications.

Application Fit and Material Selection

Our stainless steel brackets are available in 304, 316, and other corrosion-resistant grades, selected based on environmental exposure and load requirements. For coastal or industrial environments, we recommend 316 stainless steel for enhanced pitting resistance. Brackets are also available in galvanized or powder-coated finishes for added protection.

We design brackets to accommodate various panel types:

• Natural stone (granite, marble, limestone): Heavy panels require robust brackets with high load ratings and proper anchoring.
• Ceramic and terracotta: Our clip brackets support concealed fixing systems, reducing visible hardware.
• Composite and ACM panels: Lightweight systems benefit from adjustable brackets that allow precise alignment.

Each bracket is engineered to transfer wind load, dead load, and thermal movement safely to the backing structure. We provide load capacity data and installation guidelines with every order.

Engineering and Customization

As a manufacturer, we offer full customization services. Our R&D team works from your architectural drawings, structural calculations, or physical samples to produce brackets that meet exact specifications. We can adjust:

• Dimensions (length, width, thickness, projection)
• Material grade and finish
• Slotted holes for adjustability
• Reinforcement ribs or gussets for high-load areas
• Special shapes for unique facade geometries

Our in-house tooling team develops custom dies and fixtures, ensuring cost-effective production for both prototype and large-volume orders. We also provide technical support during the design phase to optimize bracket performance and installation efficiency.

Quality Assurance and Testing

Quality is embedded in every production step. We operate our own laboratory equipped with a spectrometer, tensile tester, and surface inspection tools. Each batch is tested for:

• Chemical composition verification
• Mechanical properties (yield, tensile strength)
• Dimensional accuracy using precision gauges
• Surface finish and corrosion resistance (salt spray tests on request)

We follow ISO9001 quality management practices and can provide material certificates and test reports. For international projects, we coordinate third-party inspections (SGS, BV, TUV) as required.

Installation and Project Support

We supply brackets with clear installation instructions and technical drawings. Our team assists with:

• Anchoring recommendations for concrete, block, or steel substrates
• Spacing and layout guidance based on panel dimensions and wind load
• Compatibility with undercut anchors, cast-in channels, or expansion anchors

For large projects, we provide sample brackets for on-site testing and mock-up approval before mass production. Our logistics team coordinates shipping worldwide, with packing designed to prevent damage during transit.

Information We Use to Configure Your Solution

To prepare an accurate quotation and engineering proposal, we need the following project details:

Send us your drawings, specifications, or samples, and we will respond within 12 working hours with a tailored solution.

Frequently Asked Questions

What stainless steel grades do you use for cladding brackets?

We primarily use SS304 and SS316. SS304 is suitable for most environments, while SS316 offers higher corrosion resistance for coastal or chemically aggressive areas. We can also supply other grades on request.

Can you manufacture brackets from our drawings?

Yes, we specialize in custom fabrication. Our engineering team reviews your drawings and provides feedback on manufacturability and material selection. We produce samples for approval before mass production.

What is the typical lead time for custom brackets?

Lead time depends on complexity and quantity. For standard brackets, we can ship within 2-3 weeks. Custom designs may require additional time for tooling and sampling. We provide a confirmed schedule with each quotation.

Do you provide load test data for your brackets?

We can provide calculated load capacities based on material properties and geometry. For critical projects, we arrange third-party load testing to verify performance.

How do you ensure quality for large orders?

We implement in-process inspections and final quality checks. Each batch is traceable to material certificates. We also offer pre-shipment inspection by independent agencies if required.